Project Description

IFI ANSI AMSE – Standard

 

Square and Hex Bolts and Screws
– Heavy Hex Bolts ASME B18.2.1 1996
– Heavy Hex Screws ASME B18.2.1 1996
– Hex Bolts ASME B18.2.1 1996
– Hex Cap Screws ASME B18.2.1 1996
– Square Bolts ASME B18.2.1 1996

Large Size Heavy Hex Screws
– Large Size Heavy Hex Screws IFI-149 2000

Hex Flange Screws
– Hex Flange Screws IFI-111 2002

Flange 12-Point Screws
– Flange 12-Point Screws IFI-115 2002

Round Head Bolts
– 114 Degree Countersunk Square Neck Bolts ASME B18.5 1990(R 1998)
– Contersunk Bolts and Slotted countersunk Bolts ASME B18.5 1990(R 1998)
– Flat Countersunk Head Elevator Bolts ASME B18.5 1990(R 1998)
– Round Head Bolts ASME B18.5 1990(R 1998)
– Round Head Fin Neck Bolts ASME B18.5 1990(R 1998)
– Round Head Ribbed Neck Bolts ASME B18.5 1990(R 1998)
– Round Head Short Square Neck Bolts ASME B18.5 1990(R 1998)
– Round Head Square Neck Bolts ASME B18.5 1990(R 1998)
– Step Bolts ASME B18.5 1990(R 1998)
– T-Head Bolts ASME B18.5 1990(R 1998)

Plow Bolts
– No.3 Head Plow Bolts(Round,Countersunk,Square Neck) ASME B18.9 1996
– No.4 Regular Head Plow Blots(Square Head,Countersunk) ASME B18.9 1996
– No.4 Repair Head Plow Blots(Square Head,Countersunk) ASME B18.9 1996
– No.6 Regular Head Plow Blots(Square Head,Heavy Key) ASME B18.9 1996
– No.6 Repair Head Plow Bolts(Square Head,Heavy Key) ASME B18.9 1996
– No.7 Head Plow Bolts(Round,Countersunk,Reverse Key) ASME B18.9 1996

Track Bolts
– Elliptic Neck Track Bolts ANSI/ASME B18.10 1982(R 2000)
– Oval Neck Track Bolts ANSI/ASME B18.10 1982(R 2000)

Forged Eyebolts
– Plain Pattern(Straight Shank) Eyebolts ASME B18.15 1985(R 1995)
– Shoulder Pattern Eyebolts ASME B18.15 1985(R 1995)

Studs and Bent Bolts
– Bent Bolts IFI-136 2002
– Double End Studs Bolts IFI-136 2002
– Interference-Thread Double End Studs Bolts IFI-136 2002

Slotted Head Cap Screws
– Slotted Fillister Head Cap Screws ASME B18.6.2 1998
– Slotted Flat Countersunk Head Cap Screws ASME B18.6.2 1998
– Slotted Round Head Cap Screws ASME B18.6.2 1998

Threaded Projection Weld Studs
– Heavy Duty Type US3 Projection Weld Studs IFI-148 2002
– Type T3 Projection Weld Studs IFI-148 2002
– Type TC4 Projection Weld Studs IFI-148 2002
– Type TD Projection Weld Studs IFI-148 2002
– Type TUS3 Projection Weld Studs IFI-148 2002
– Type U3 Projection Weld Studs IFI-148 2002
– Type UC4 Projection Weld Studs IFI-148 2002
– Type UR Projection Weld Studs IFI-148 2002

Square and Hex Nuts
– Heavy Hex Flat Nuts and Heavy Hex Flat Jam Nuts ASME/ANSI B18.2.2 1987(R 1999)
– Heavy Hex Nuts and Heavy Hex Jam Nuts ASME/ANSI B18.2.2 1987(R 1999)
– Heavy Hex Slotted Nuts ASME/ANSI B18.2.2 1987(R 1999)
– Heavy Square Nuts ASME/ANSI B18.2.2 1987(R 1999)
– Hex Flat Nuts and Hex Flat Jam Nuts ASME/ANSI B18.2.2 1987(R 1999)
– Hex Nuts and Hex Jam Nuts ASME/ANSI B18.2.2 1987(R 1999)
– Hex Slotted Nuts ASME/ANSI B18.2.2 1987(R 1999)
– Hex Thick Nuts ASME/ANSI B18.2.2 1987(R 1999)
– Hex Thick Slotted Nuts ASME/ANSI B18.2.2 1987(R 1999)
– Square Nuts ASME/ANSI B18.2.2 1987(R 1999)

Hex Flange Nuts and Large Hex Flange Nuts
– Hex Flange Nuts IFI-145 2002

Hex Coupling Nuts
– Hex Coupling Nuts IFI-128 2000

Nuts for Track Bolts
– Track Bolts Nuts ANSI/ASME B18.10 1982(R 2000)

Square and Hex Machine Screw Nuts
– Square and Hex Machine Screw Nuts ANSI/ASME B18.6.3 1998

Wing Nuts
– Type A Wing Nuts ASME B18.6.x DRAFT STANDARD 2002
– Type B Wing Nuts ASME B18.6.x DRAFT STANDARD 2002
– Type C Wing Nuts ASME B18.6.x DRAFT STANDARD 2002
– Type D Wing Nuts ASME B18.6.x DRAFT STANDARD 2002

Structural Bolting
– Compressible Washer-Type Direct Tension Indicators ASME DRAFT Revision B18.2.6 2003
– Hardened Beveled Washers with Slope or Taper in Thickness 1:6 ASME DRAFT Revision B18.2.6 2003
– Hardened Stell Circular and Circular Clipped Washer ASME DRAFT Revision B18.2.6 2003
– Heavy Hex Nuts for Use with Structural Bolts ASME DRAFT Revision B18.2.6 2003
– Heavy Hex Structral Bolts ASME DRAFT Revision B18.2.6 2003
– Heavy Hex Structural Bolts ASME DRAFT Revision B18.2.6 2003
– Structural Bolts,Steel.Heat Treated,120/105 KSI Minimum Tensile Strength ASTM A325 2002
– Twist Off Type Tension Control Structural Bolts Heavy Hex Head and Round Head Configurations ASME DRAFT Revision B18.2.6 2003
– Washers for High Strength Structural Bolts ASME DRAFT Revision B18.2.6 2003
– Washer-Type Direct Tension Indicators ASME DRAFT Revision B18.2.6 2003

Locking Fasteners
– Prevailing-Torque Type Hex Flange Nuts IFI-100/107 2002
– Prevaliling-Torque Type Regular Hex and Light Hex Series Nuts IFI-100/107 2002

Socket Screws
– Drill and Counterbore Size for Socket Head Cap Screws ASME B18.3 2002
– Drilled Hexagon Socket Head Cap Screws ASME B18.3 2002
– Gages for Hexagon Sockets ASME B18.3 2002
– Gages for Spline Sockets ASME B18.3 2002
– Hexagon and Spline Socket Button Head Cap Screws ASME B18.3 2002
– Hexagon and Spline Socket Flat Countersunk Head Cap Screws ASME B18.3 2002
– Hexagon and Spline Socket Head Cap Screws ASME B18.3 2002
– Hexagon and Spline Socket Set Screws ASME B18.3 2002
– Hexagon Keys and Bits ASME B18.3 2002
– Hexagon Socket Head Shoulder Screws ASME B18.3 2002
– Hexagon Socket ASME B18.3 2002
– Low Head Hexagon Socket Cap Screws ASME B18.3 2002
– Spline Keys and Bits ASME B18.3 2002
– Spline Sockets ASME B18.3 2002
– Underhead Fillets for Socket Head Cap Screws ASME B18.3 2002

Tapping Screws
– Cross Recessed Fillister Head Tapping Screws Abstract of ASME B18.6.4 1998
– Cross Recessed Flat Countersunk Head Tapping Screws Abstract of ASME B18.6.4 1998
– Cross Recessed Flat Countersunk Rtim Head Tapping Screws Abstract of ASME B18.6.4 1998
– Cross Recessed Oval Countersunk Head Tapping Screws Abstract of ASME B18.6.4 1998
– Cross Recessed Pan Head Tapping Screws Abstract of ASME B18.6.4 1998
– Cross Recessed Undercut Flat Countersunk Head Tapping Screws Abstract of ASME B18.6.4 1998
– Cross Recessed Undercut Oval Countersunk Head Tapping Screws Abstract of ASME B18.6.4 1998
– Flat and Oval Countersunk Trim Head Screws Abstract of ASME B18.6.4 1998
– Heads of Oval Countersunk Trim Head Tapping Screws Abstract of ASME B18.6.4 1998
– Hex Washer Head Tapping Screws Abstract of ASME B18.6.4 1998
– Regular and Large Hex Head Tapping Screws Abstract of ASME B18.6.4 1998
– Round Head Type U Metallic Drive Screws Abstract of ASME B18.6.4 1998
– Self-Drilling Tapping Screws SAE J78 1998
– Slotted Fillister Head Tapping Screws Abstract of ASME B18.6.4 1998
– Slotted Flat Countersunk Head Tapping Screws Abstract of ASME B18.6.4 1998
– Slotted Oval Countersunk Head Tapping Screws Abstract of ASME B18.6.4 1998
– Slotted Pan Head Tapping Screws Abstract of ASME B18.6.4 1998
– Slotted Undercut Flat Countersunk Head Tapping Screws Abstract of ASME B18.6.4 1998
– Slotted Undercut Oval Countersunk Head Tapping Screws Abstract of ASME B18.6.4 1998
– Tapping Screws and Metallic Drive Screws Abstract of ASME B18.6.4 1998
– Thread Rolling Tapping Screws SAE J81 1997
– Threads and Points for Type AB Thread Forming Tapping Screws Abstract of ASME B18.6.4 1998
– Threads and Points for Types B and BP Thread Forming Tapping Screws Abstract of ASME B18.6.4 1998
– Threads and Points for Types BF and BT Thread Cutting Tapping Screws Abstract of ASME B18.6.4 1998
– Threads and Points for Types D,F,G, and T Thread Cutting Tapping Screws Abstract of ASME B18.6.4 1998
– Type C Thread Forming Tapping Screws Abstract of ASME B18.6.4 1998
– Type I Cross Recessed Oval Countersunk Trim Head Tapping Screws:Long Screw with Shoulder and Short Screws Abstract of ASME B18.6.4 1998
– Type I Gage Points Abstract of ASME B18.6.4 1998
– Type IA Cross Recessed Oval Countersunk Trim Head Tapping Screws:Long Screws with Shoulder and Short Screws Abstract of ASME B18.6.4 1998
– Type IA Gage Points Abstract of ASME B18.6.4 1998
– Type II Cross Recessed Oval Countersunk Trim Head Tapping Screws Abstract of ASME B18.6.4 1998
– Type II Gage Points Abstract of ASME B18.6.4 1998
– Types A,AB and BP Tapping Screws Abstract of ASME B18.6.4 1998

Machine Screws
– Combination Slotted and Cross Recessed Type I Truss Head Machine Screws Draft Revision ASME B18.6.3 2002
– Cross Reccessed Oval Countersunk Head Machine Screws Draft Revision ASME B18.6.3 2002
– Cross Recessed 100 Degree Flat Countersunk Head Machine Screws Draft Revision ASME B18.6.3 2002
– Cross Recessed Binding Head Machine Screws Draft Revision ASME B18.6.3 2002
– Cross Recessed Close Tolerance 100 Degree Flat Countersunk Head Machine Screws Draft Revision ASME B18.6.3 2002
– Cross Recessed Fillister Head Machine Screws Draft Revision ASME B18.6.3 2002
– Cross Recessed Flat Countersunk Head Machine Screws Draft Revision ASME B18.6.3 2002
– Cross Recessed Flat Countersunk Trim Head Machine Screws Draft Revision ASME B18.6.3 2002
– Cross Recessed Oval Countersunk Trim Head Machine Screws Draft Revision ASME B18.6.3 2002
– Cross Recessed Pan Head Machine Screws Draft Revision ASME B18.6.3 2002
– Cross Recessed Round Head Machine Screws Draft Revision ASME B18.6.3 2002
– Cross Recessed Truss Head Machine Screws Draft Revision ASME B18.6.3 2002
– Cross Recessed Type I Indented Hex Washer Head Machine Screws(Slot Optional) Draft Revision ASME B18.6.3 2002
– Cross Recessed Type I Round Washer Head Machine Screws Draft Revision ASME B18.6.3 2002
– Cross Recessed Undercut Flat Countersunk Head Machine Screws Draft Revision ASME B18.6.3 2002
– Cross Recessed Undercut Oval Cpuntersunk Head Machine Screws Draft Revision ASME B18.6.3 2002
– Cross Recessed With Slot for Types I and IA and Type III Round Head Machine Screws Draft Revision ASME B18.6.3 2002
– Flat Countersunk Trim Head Machine Screws Draft Revision ASME B18.6.3 2002
– Plain(Unslotted) and Slotted Hex Washer Head Macxhine Screws Draft Revision ASME B18.6.3 2002
– Plain(Unslotted) and Slotted Regular and Large Hex Head Machine Screws Draft Revision ASME B18.6.3 2002
– Slotted 100 Degree Flat Countersunk Head Machine Screws Draft Revision ASME B18.6.3 2002
– Slotted Binding Head Machine Screws Draft Revision ASME B18.6.3 2002
– Slotted Close Tolerance 100 Degree Flat Countersunk Head Machine Screws Draft Revision ASME B18.6.3 2002
– Slotted Drilled Fillister Head Machine Screws Draft Revision ASME B18.6.3 2002
– Slotted Fillister Head Machine Screws Draft Revision ASME B18.6.3 2002
– Slotted Flat Countersunk Head Nachine Screws Draft Revision ASME B18.6.3 2002
– Slotted Oval Countersunk Head Machine Screws Draft Revision ASME B18.6.3 2002
– Slotted Pan Head Machine Screws Draft Revision ASME B18.6.3 2002
– Slotted Round Head Machine Screws Draft Revision ASME B18.6.3 2002
– Slotted Truss Head Machine Screws Draft Revision ASME B18.6.3 2002
– Slotted Undercut Flat Countersunk Head Machine Screws Draft Revision ASME B18.6.3 2002
– Slotted Undercut Oval Countersunk Head Machine Screws Draft Revision ASME B18.6.3 2002
– Slotted-Type I and Type IA Cross Recessed Pan Head Machine Screws Draft Revision ASME B18.6.3 2002
– Square and Square Slotted Type III Recessed Truss Head Machine Screws Draft Revision ASME B18.6.3 2002
– Square Recessed Type III Binding Head Machine Screws Draft Revision ASME B18.6.3 2002
– Square Recessed Type III Fillister Head Machine Screws Draft Revision ASME B18.6.3 2002
– Square Recessed Type III Flat Countersunk Head Machine Screws Draft Revision ASME B18.6.3 2002
– Square Recessed Type III Oval Countersunk Head Machine Screws Draft Revision ASME B18.6.3 2002
– Square Recessed Type III Pan Head Machine Screws(Optionally Slotted) Draft Revision ASME B18.6.3 2002
– Square Recessed Type III Undercut Oval Countersunk Head Machine Screws Draft Revision ASME B18.6.3 2002
– Squeare Recessed Type III Undercut Flat Countersunk Head Machine Screws Draft Revision ASME B18.6.3 2002
– Type I Cross Recessed Indented and Nonindented Regular and Large Hex Head Machine Screws Draft Revision ASME B18.6.3 2002

Square Head and Slotted Headless Set Screws
– Alternate Styles of Points for Thumb and Wing Screws IFI-156 2002
– Slotted Headless Set Screws ASME B18.6.2 1998
– Socket Head Cap Screw ASME B18.6.2 1998
– Square Head Set Screws ASME B18.6.2 1998
– Type A,Heavy Thumb Screws IFI-156 2002
– Type A,Regular Thumb Screws IFI-156 2002
– Type A,Wing Screws IFI-156 2002
– Type B,Heavy Thumb Screws IFI-156 2002
– Type B,Regular Thumb Screws IFI-156 2002
– Type B,Style 1 Wing Screws IFI-156 2002
– Type B,Style 2 Wing Screws IFI-156 2002
– Type C,Style 1 Wing Screws IFI-156 2002
– Type C,Style 2 Wing Screws IFI-156 2002
– Type D,Wing Screws IFI-156 2002

Wood Screws
– Cross Recessed Flat Countersunk Head Wood Screws ASME B18.6.1 1981(R 1997)
– Cross Recessed Oval Countersunk Head Wood Screws ASME B18.6.1 1981(R 1997)
– Cross Recessed Pan Head Wood Screws ASME B18.6.1 1981(R 1997)
– Slotted Flat Countersunk Head Wood Screws ASME B18.6.1 1981(R 1997)
– Slotted Oval Countersunk Head Wood Screws ASME B18.6.1 1981(R 1997)
– Slotted Pan Head Wood Screws ASME B18.6.1 1981(R 1997)
– Threads and Body Diameters for Wood Screws ASME B18.6.1 1981(R 1997)

Miniature Screws
– Slotted 100 Degree Flat Head Miniature Screws ASME B18.11 1961(R 2000)
– Slotted Binding Head Miniature Screws ASME B18.11 1961(R 2000)
– Slotted Fillister Head Miniature Screws ASME B18.11 1961(R 2000)
– Slotted Pan Head Miniature Screws ASME B18.11 1961(R 2000)

Large Rivet 1/2 In. Nominal Diameter and Larger
– Button Head Rivets ASME B18.1.2 1972(R 2001)
– Cone Head Rivets ASME B18.1.2 1972(R 2001)
– Flat Countersunk Head Rivets ASME B18.1.2 1972(R 2001)
– High Button Head(Acorn) Rivets ASME B18.1.2 1972(R 2001)
– Oval Countersunk Head Rivets ASME B18.1.2 1972(R 2001)
– Pan Head Rivets ASME B18.1.2 1972(R 2001)
– Swell-Neck Rivets ASME B18.1.2 1972(R 2001)

Small Solid Rivets 7/16 In. Nominal Diameter and Smaller
– Belt Rivets And 60-Degrees Flat Countersunk Head Rivets ASME B18.1.1 1972(R 2001)
– Button Head Rivets and Pan Head Rivets ASME B18.1.1 1972(R 2001)
– Cooper Rivets ASME B18.1.1 1972(R 2001)
– Flat Head Rivest and Flat Countersunk Head Rivets ASME B18.1.1 1972(R 2001)
– Standard Header Points for Small Solid Rivets ASME B18.1.1 1972(R 2001)
– Truss Head Rivets and Thinners Rivets ASME B18.1.1 1972(R 2001)

Tubular Rivets,Full Tubular Rivets,Split Rivets and Rivet Caps
– 120 Degree Flat Countersunk Head Semi-Tubular Rivets ASME B18.7 1972(R 2001)
– 150 Degree Flat Countersunk Head Semi-Tubular Rivets ASME B18.7 1972(R 2001)
– Full Tubular Rivets ASME B18.7 1972(R 2001)
– Oval Head and Flat Countersunk Head Split Rivets ASME B18.7 1972(R 2001)
– Oval Head Semi-Tubular Rivets ASME B18.7 1972(R 2001)
– Rivet Caps ASME B18.7 1972(R 2001)
– Truss Head Semi-Tubular Rivets ASME B18.7 1972(R 2001)

Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets
– 100 Degree and 120 Degree Countersunk Head Style Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets IFI-119 2003
– Regualr and Large Dome Head Style Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets IFI-119 2003

Structural Splitting Self-Plugging Pull Mandrel Blind Rivets
– 100 Degree Countersunk Head Structural Splitting Self-Plugging Pull Manbdrel Blind Rivets IFI-130 2003
– Regular and Large Head Structural Splitting Self-Plugging Pull Mandrel Blind Rivets IFI-130 2003

Muti-Grip Flush Break Pull Mandrel Self-Plugging Blind Rivets
– 100 Degree Countersunk Head Muti-Grip Flush Break Pull Mandrel Self-Plugging Blind Rivets IFI-134 2003
– Regular and Large Muti-Grip Dome Head Flush Break Pull Mandrel Self-Plugging Blind Rivets IFI-134 2003

Plain Washer
– Plain Washers ASME B18.22.1 1965(R 1998)

Lock Washers
– External Tooth Lock Washers ASME B18.21.1 1999
– Extra-Duty Helical Spring Lock Washers ASME B18.21.1 1999
– Heavy Helical Spring Lock Washers ASME B18.21.1 1999
– Hight-Collar Helical Spring Lock Washers ASME B18.21.1 1999
– Intelnal Tooth Lock Washers ASME B18.21.1 1999
– Internal-External Tooth Lock Washers ASME B18.21.1 1999
– Regular Helical Spring Lock Washers ASME B18.21.1 1999

Hardened Stell Washers
– Hardened Steel Washers Abstract Of ASTM F436 1993(R 2000)

Clevis Pins and Cotter Pins
– Clevis Pins ASME B18.8.1 1994 (R 2000)
– Cotter Pins ASME B18.8.1 1994 (R 2000)

Taper Pins,Dowl Pins,Straight Pin,Grooved Pins,and Spring Pins
– Coiled-Type Spring Pins ASME B18.8.2 2000
– Dowel Pins ASME B18.8.2 2000
– Grooved Pins ASME B18.8.2 2000
– Grooved T-Head Cotter Pins ASME B18.8.2 2000
– Round Head Grooved Drive Studs ASME B18.8.2 2000
– Slotted Type Spring Pins ASME B18.8.2 2000
– Straight Pins ASME B18.8.2 2000
– Taper Pins ASME B18.8.2 2000

Square, Hex, Heavy Hex, and Askew Head Bolts and Hex,Heavy Hex, Hex Flange, Lobed Head, and Lag Screws(INCH SERIES)
– Askew Head Bolts ASME B18.2.1-2012
– Heavy Hex Bolts ASME B18.2.1-2012
– Heavy Hex Screws ASME B18.2.1-2012
– Hex Bolts ASME B18.2.1-2012
– Hex Cap Screws ASME B18.2.1-2012
– Hex Lag Screws ASME B18.2.1-2012
– Lobed Head Screws ASME B18.2.1-2012
– Square Head Bolts ASME B18.2.1-2012
– Square Lag Screws ASME B18.2.1-2012

ROUND HEAD BOLTS (INCH SERIES)
– 114 Degree Countersunk Square Neck Bolts ASME B18.5-2012(R2017)
– Countersunk Bolts and Slotted Countersunk Bolts ASME B18.5-2012(R2017)
– Flat Countersunk Head Elevator Bolts ASME B18.5-2012(R2017)
– Round Head Bolts ASME B18.5-2012 (R2017)
– Round Head Fin Neck Bolts ASME B18.5-2012(R2017)
– Round Head Ribbed Neck Bolts ASME B18.5-2012(R2017)
– Round Head Short Square Neck Bolts ASME B18.5-2012(R2017)
– Round Head Square Neck Bolts ASME B18.5-2012 (R2017)
– Step Bolts ASME B18.5-2012(R2017)
– T-Head Bolts ASME B18.5-2012(R2017)

CONTINUOUS THREAD STUDS, STUDS FOR FLANGE BOLTING (STUD BOLTS), AND DOUBLE-END STUDS (INCH SERIES)
– Clamping Type Studs ASME B18.31.2-2014
– Continuous Thread Studs ASME B18.31.2-2014
– Tap End Studs (1.5D Engagement) ASME B18.31.2-2014

BENT BOLTS (INCH SERIES)
– Eyebolts, Closed Anchor Ring ASME B18.31.5-2011(R2016)
– Eyebolts, Open Anchor Ring ASME B18.31.5-2011(R2016)
– Flange 12-Point Screws IFI-115-2014
– Hook Bolts, Acute Angle Bend ASME B18.31.5-2011(R2016)
– Hook Bolts, Right Angle Bend ASME B18.31.5-2011(R2016)
– Round Bend Hook Bolts ASME B18.31.5-2011(R2016)
– U-Bolts, Round Bend ASME B18.31.5-2011(R2016)
– U-Bolts, Square Bends ASME B18.31.5-2011(R2016)

TAP BOLTS (INCH SERIES)
– Hex Tap Bolts IFI-199-2014

SOCKET CAP, SHOULDER, SET SCREWS,AND HEX KEYS (INCH SERIES)
– Drilled Hexagon Socket Head Cap Screws ASME B18.3-2012
– Gages for Hexagon Sockets ASME B18.3-2012
– Hexagon Keys and Bits ASME B18.3-2012
– Hexagon Socket Button Head Cap Screws ASME B18.3-2012
– Hexagon Socket Flat Countersunk Head Cap Screws ASME B18.3-2012
– Hexagon Socket Head Cap Screws ASME B18.3-2012
– Hexagon Socket Head Shoulder Screws ASME B18.3-2012
– Hexagon Socket Set Screws Continued ASME B18.3-2012
– Hexagon Socket Set Screws ASME B18.3-2012
– Hexagon Sockets ASME B18.3-2012
– Low Head Hexagon Socket Cap Screws ASME B18.3-2012
– Under Head Fillets for Socket Head Cap Screws Threaded to the Head ASME B18.3-2012
– Under Head Fillets for Socket Head Cap Screws With an Unthreaded Length of Body Diameter ASME B18.3-2012

FASTENERS FOR USE IN STRUCTURAL APPLICATIONS
– Compressible Washer-Type Direct Tension Indicators ASME B18.2.6-2010
– Hardened Beveled Washers with Slope or Taper in Thickness 1:6 ASME B18.2.6-2010
– Hardened Steel Circular and Circular Clipped Washers ASME B18.2.6-2010
– Heavy Hex Nuts for Use with Structural Bolts ASME B18.2.6-2010
– Heavy Hex Structural Bolts ASME B18.2.6-2010
– Twist Off Type Tension Control Structural Bolts: Heavy Hex Head and Round Head Configurations ASME B18.2.6-2010

NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE,HEX FLANGE, AND COUPLING NUTS (INCH SERIES)
– Heavy Hex Flat Nuts and Heavy Hex Flat Jam Nuts ASME B18.2.2-2015
– Heavy Hex Nuts and Heavy Hex Jam Nuts ASME B18.2.2-2015
– Heavy Hex Slotted Nuts ASME B18.2.2-2015
– Heavy Square Nuts ASME B18.2.2-2015
– Hex Coupling Nuts ASME B18.2.2-2015
– Hex Flange Nuts and Large Hex Flange Nuts ASME B18.2.2-2015
– Hex Flat Nuts and Hex Flat Jam Nuts ASME B18.2.2-2015
– Hex Nuts and Hex Jam Nuts ASME B18.2.2-2015
– Hex Slotted Nuts ASME B18.2.2-2015
– Hex Thick Nuts ASME B18.2.2-2015
– Hex Thick Slotted Nuts
– Slot Gages and Gage Pins ASME B18.2.2-2015
– Small Pattern Hex Machine Screw Nuts ASME B18.2.2-2015
– Square and Hex Machine Screw Nuts ASME B18.2.2-2015
– Square Nuts ASME B18.2.2-2015

WING NUTS (INCH SERIES)
– Type A Wing Nuts ASME B18.6.9-2010
– Type B, Style 1 Wing Nuts ASME B18.6.9-2010 (R2017)
– Type C, Style 1 Wing Nuts ASME B18.6.9-2010 (R2017)
– Type C, Style 2 Wing Nuts ASME B18.6.9-2010(R2017)
– Type D, Style 1 Wing Nuts ASME B18.6.9-2010(R2017)
– Type D, Style 2 Wing Nuts (Low Wing) ASME B18.6.9-2010(R2017)

SERRATED HEX FLANGE LOCKNUTS 90,000 psi (INCH SERIES)
– Large Serrated Flange Locknuts ASME B18.16.4-2008(R2013)
– Regular Serrated Flange Locknuts ASME B18.16.4-2008(R2013)

PREVAILING TORQUE LOCKNUTS (INCH SERIES)
– Nylon Insert Hex Flange Nuts ASME B18.16.6-2017
– Prevailing Torque AlI-Metal Type Hex Flange Nuts ASME B18.16.6-2017
– Prevailing Torque All-Metal Type Hex Nuts ASME B18.16.6-2017
– Style NE Nylon Insert Locknut Dimensions ASME B18.16.6-2017
– Style NM Nylon Insert Locknut Dimensions ASME B18.16.6-2017
– Style NTE Nylon Insert Locknut Dimensions ASME B18.16.6-2017
– Style NTM Nylon Insert Locknut Dimensions ASME B18.16.6-2017
– Style NTU Nylon Insert Locknut Dimensions ASME B18.16.6-2017
– Style NU Nylon Insert Locknut Dimensions ASME B18.16.6-2017

WOOD SCREWS (INCH SERIES)
– Cross Recessed Flat Countersunk Head Wood Screws ASME B18.6.1-1981(R2016)
– Cross Recessed Oval Countersunk Head Wood Screws ASME B18.6.1-1981(R2016)
– Cross Recessed Pan Head Wood Screws ASME B18.6.1-1981(R2016)
– Cross Recessed Round Head Wood Screws ASME B18.6.1-1981(R2016)
– Slotted Flat Countersunk Head Wood Screws ASME B18.6.1-1981(R2016)
– Slotted Oval Countersunk Head Wood Screws ASME B18.6.1-1981(R2016)
– Slotted Pan Head Wood Screws ASME B18.6.1-1981(R2016)
– Slotted Round Head Wood Screws ASME B18.6.1-1981(R2016)
– Threads and Body Diameters for Wood Screws ASME B18.6.1-1981(R2016)

SLOTTED HEAD CAP SCREWS, SQUARE HEAD SET SCREWS, AND SLOTTED HEADLESS SET SCREWS (INCH SERIES)
– Slotted Fillister Head Cap Screws ASME B18.6.2-1998(R2010)
– Slotted Flat Countersunk Head Cap Screws ASME B18.6.2-1998(R2010)
– Slotted Headless Set Screws ASME B18.6.2-1998(R2010)
– Slotted Round Head Cap Screws ASME B18.6.2-1998(R2010)
– Square Head Set Screws (Cont d) ASME B18.6.2-1998(R2010)
– Square Head Set Screws ASME B18.6.2-1998(R2010)

MACHINE SCREWS, TAPPING SCREWS, AND METALLIC DRIVE SCREWS (INCH SERIES)
– 100-deg Flat Countersunk Head Screws (Machine Screws Only) ASME B18.6.3-2013
– Binding Head Screws (Machine Screws Only) ASME B18.6.3-2013
– Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only) ASME B18.6.3-2013
– Combination Slotted – Pan Head Screws ASME B18.6.3-2013
– Combination Slotted Round Head Screws ASME B18.6.3-2013
– Combination Slotted Truss Head Screws ASME B18.6.3-2013
– Combination Slotted Type I Indented Hex Washer Head Screws ASME B18.6.3-2013
– Fillister Head Screws ASME B18.6.3-2013
– Flat Countersunk Head Screws ASME B18.6.3-2013
– Flat Countersunk Trim Head Screws ASME B18.6.3-2013
– Gage Heads for Types I, IA , and III Recesses ASME B18.6.3-2013
– Gage Points for Type I Recess ASME B18.6.3-2013
– Gage Points for Type IA Recess ASME B18.6.3-2013
– HEADER POINTS FOR MACHINE SCREWS BEFORE THREADING ASME B18.6.3-2013
– Indented Hex Washer Head Screws ASME B18.6.3-2013
– Indented Regular and Large Hex Head Screws ASME B18.6.3-2013
– Oval 82-deg Countersunk Trim Head Screws ASME B18.6.3-2013
– Oval Countersunk Head Screws ASME B18.6.3-2013
– Pan Head Screws (Types IA, III, and VI) ASME B18.6.3-2013
– Plain (Unslotted) and Slotted Regular and Large Hex Head Screws ASME B18.6.3-2013
– Plain and Slotted Hex Washer Head Screws ASME B18.6.3-2013
– Round Head Screws ASME B18.6.3-2013
– Round Head Type U Metallic Drive Screws ASME B18.6.3-2013
– Round Washer Head Screws ASME B18.6.3-2013
– Slotted 100-deg Flat Countersunk Head Screws (Machine Screws Only) ASME B18.6.3-2013
– Slotted Binding Head Screws (Machine Screws Only) ASME B18.6.3-2013
– Slotted Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only) ASME B18.6.3-2013
– Slotted Drilled Fillister Head Screws (Machine Screws Only) ASME B18.6.3-2013
– Slotted Fillister Head Screws ASME B18.6.3-2013
– Slotted Flat Countersunk Head Screws ASME B18.6.3-2013
– Slotted Oval Countersunk Head Screws ASME B18.6.3-2013
– Slotted Pan Head Screws ASME B18.6.3-2013
– Slotted Round Head Screws ASME B18.6.3-2013
– Slotted Round Washer Head Screws ASME B18.6.3-2013
– Slotted Truss Head Screws ASME B18.6.3-2013
– Slotted Undercut 82-deg Flat Countersunk Head Screws ASME B18.6.3-2013
– Slotted Undercut Oval Countersunk Head Screws ASME B18.6.3-2013
– Threads and Points for Type A Thread-Forming Tapping Screws ASME B18.6.3-2013
– Threads and Points for Type AB and ABR Thread-Forming Tapping Screws ASME B18.6.3-2013
– threads and points for Type C thread-forming tapping screws ASME B18.6.3-2013
– Threads and Points for Types B and BP Thread-Forming Tapping Screws ASME B18.6.3-2013
– Threads and Points for Types BF and BT Thread-Cutting Tapping Screws ASME B18.6.3-2013
– Threads and Points for Types D, F, G, and T Thread-Cutting Tapping Screws ASME B18.6.3-2013
– Truss Head Screws ASME B18.6.3-2013
– Type I Cross Recessed Pan Head Screws ASME B18.6.3-2013
– Type I Nonindented Regular and Large Hex Head Screws ASME B18.6.3-2013
– Type III Square Fit Gage Points ASME B18.6.3-2013
– Type III Square Penetration Gage Points ASME B18.6.3-2013
– Type TRS Tapping Screws ASME B18.6.3-2013
– Type VI Recess Gage Elements ASME B18.6.3-2013
– Undercut 82-deg Flat Countersunk Head Screws ASME B18.6.3-2013
– Undercut Oval 82-deg Countersunk Head Screws ASME B18.6.3-2013

Screw and Washer Assemblies一SEMS (Inch Series)
– Conical Spring Washers for SEMS ASME B18.13 2017
– External Tooth Lock Washers for SEMS ASME B18.13 2017
– Helical Spring Lock Washers for SEMS with Machine and Tapping Screws Having Machine Screw Thread Diameter-Pitch Combinations ASME B18.13 2017
– Helical Spring Lock Washers for SEMS with Screws Having Type B Tapping Screw Thread Diameter-Pitch Combinations ASME B18.13 2017
– Helical Spring Lock Washers for Socket Head Cap Screw SEMS ASME B18.13 2017
– Internal Tooth Lock Washers for SEMS ASME B18.13 2017
– Plain Washers for SEMS ASME B18.13 2017

Steel Self-Drilling Tapping Screws
– Threads and Points for Types BSD and CSD Self-Drilling Tapping Screws IFI-113 2015

WASHERS: HELICAL SPRING-LOCK, TOOTH LOCK, AND PLAIN WASHERS (INCH SERIES)
– Countersunk External Tooth Lock Washers ASME B18.21.1 2009 (R2016)
– External Tooth Lock Washers ASME B18.21.1 2009 (R2016)
– Extra-Duty Helical Spring-Lock Washers ASME B18.21.1-2009(R2016)
– Fender Washers ASME B18.21.1 2009 (R2016)
– Heavy Helical Spring-Lock Washers ASME B18.21.1 2009 (R2016)
– Heavy Internal Tooth Lock Washers ASME B18.21.1-2009(R2016)
– High-Collar Helical Spring-Lock Washers ASME B18.21.1 2009 (R2016)
– Internal- External Tooth Lock Washers ASME B18.21.1-2009(R2016)
– Internal Tooth Lock Washers ASME B18.21.1-2009(R2016)
– Preferred Sizes of Type A Plain Washers ASME B18.21.1-2009(R2016)
– Regular Helical Spring-L ock Washers ASME B18.21.1-2009(R2016)
– Type B Plain Washers ASME B18.21.1-2009(R2016)

Hardened Steel Washers Inch and Metric Dimensions
– Circular Washers (Metric Washers) ASTM F436/F436M 2018
– Hardened Beveled Washers (Inch washers) ASTM F436/F436M 2018
– Hardened Beveled Washers (Metric Washers) ASTM F436/F436M 2018
– Hardened cirular, clipped Circular, and Exra-Thick (Inch Washers) ASTM F436/F436M 2018

General Purpose Semi-Tubular Rivets, Full Tubular Rivets,Split Rivets and End Caps
– 120 Deg Flat Countersunk Head Semi-Tubular Rivets ASME B18.7 2007 (R2017)
– 150 Deg Flat Countersunk Head Semi-Tubular Rivets ASME B18.7 2007 (R2017)
– Flat Countersunk Head Split Rivets ASME B18.7 2007 (R2017)
– Full Tubular Rivets ASME B18.7 2007 (R2017)
– Oval Head Semi-Tubular Rivets ASME B18.7 2007 (R2017)
– Oval Head Split Rivets ASME B18.7 2007 (R2017)
– Rivet Caps ASME B18.7 2007 (R2017)
– Truss Head Semi-Tubular Rivets ASME B18.7 2007 (R2017)

Break Mandrel Blind Rivets
– 120 Deg Countersunk Head Style Break Mandrel Blind Rivets IFI-114 2015
– Regular and Large Dome Head Style Break Mandrel Blind Rivets IFI-114 2015

Multi-Grip Break Mandrel Blind Rivets
– 120 Degree Countersunk Head Style Multi-Grip Break Mandrel Blind Rivets IFI-116 2015
– Regular and Large Dome Head Style Multi-Grip Break Mandrel Blind Rivets IFI-116 2015

Pull Through Mandrel Blind Rivets
– 100 Deg and 120 Deg Countersunk Head Style Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets IFI-119 2003 (R2013)
– 100 Degree Countersunk Head Pull Through Mandrel Blind Rivets IFI-117 2003 (R2013)
– Regular and Large Dome Head Pull Through Mandrel Blind Rivets IFI-117 2003 (R2013)
– Regular and Large Dome Head Style Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets IFI-119 2003 (R2013)

Drive Pin Blind Rivets
– Countersunk Head Drive Pin Blind Rivets IFI-123 2003 (R2013)
– Dome Head Drive Pin Blind Rivets IFI-123 2003 (R2013)

Break Mandrel Closed End Blind Rivets
– 120 Degree Countersunk Head Style Break Mandrel Closed End Blind Rivets IFI-126 2003 (R2013)
– Dome Head Style Break Mandrel Closed End Blind Rivets IFI-126 2003 (R2013)

Structural Spitting Self-Plugging Pull Mandrel Blind Rivets
– 100 Deg Countersunk Head Structural Splitting Self-Plugging Pull Mandrel Blind Rivets IFI-130 2003 (R2013)
– Regular and Large Head Structural Splitting Self-Plugging Pull Mandrel Blind Rivets IFI-130 2003 (R2013)

Test Fixture for Shear Testing Blind Rivets
– Test Fixture for Shear Testing Blind Rivets IFI-130 2003 (R2013)

Clevis Pins and Cotter Pins (Inch Series)
– Clevis Pins ASME B18.8.1 2014
– Cotter Pins ASME B18.8.1 2014

Taper Pins, Dowel Pins, Straight Pins, Grooved Pins,and Spring Pins (Inch Series)
– Chamfered and Square End Straight Pins ASME B18.8.2 2000 (R2010)
– Coiled-Type Spring Pins ASME B18.8.2 2000 (R2010)
– Grooved Pins [Note (1)] ASME B18.8.2 2000 (R2010)
– Grooved T-Head Cotter Pins ASME B18.8.2 2000 (R2010)
– Hardened Ground Machine Dowel Pins ASME B18.8.2 2000 (R2010)
– Hardened Ground Production Dowel Pins ASME B18.8.2 2000 (R2010)
– Round Head Grooved Drive Studs ASME B18.8.2 2000 (R2010)
– Slotted Type Spring Pins ASME B18.8.2 2000 (R2010)
– Taper Pins ASME B18.8.2 2000 (R2010)
– Unhardened Ground Dowel Pins ASME B18.8.2 2000 (R2010)

Test for Evaluating the Torque-Tension Relationship on Both Externally and Internally Threaded Fasteners
– Test Washer Dimensions IFI-143 2002 (R2013)